CPU. Mt 6253 Nokia chinese X8.
Fault. work well without sim and memory card.
But not work and hanged and lcd shows
lines of white color with put in sim and memory card.
Taking full backup.
COM3 [VCP0] selected
module v3.26
Device: Autodetect 6253 NOR
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C1]: 00EC:240400000000 [SAMSUNG] K5N2833ATB
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 00000000/00000000
detect sec ro...
detect custom parameters...
detect project-id...
project-id: C100.ME.HZ01EX.100928.01
detect NOR info...
number of areas/bytes to read: 1:00040000
reading (HW_STORAGE_NOR)...
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: TELSDA53_SLIM_09A_PCB01_GPRS_MT6253_S00.C100_ME_HZ 01EX_100928_01.BIN
project-id: C100.ME.HZ01EX.100928.01, 00000000
code offset: 00000000
ffs offset/size [02]: 00E00000/00200000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
====================
New firmware found (v.3.26, database date: 13.01.2011):
TELSDA53_SLIM_09A_PCB01_GPRS_MT6253_S00.C100_ME_HZ 01EX_100928_01.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support:
[email protected] or upload files to
RapidShare AG, Cham, Switzerland or
4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 14Mb
number of areas/bytes to read: 1:00E00000
reading (HW_STORAGE_NOR)...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\TELSDA53_SLIM_09A _PCB01_GPRS_MT6253_S00.C100_ME_HZ01EX_100928_01__f irmware_20110201-143640.B0M.bin
Disconnect...
done
Finished, time used: 30 min 5 sec
Remove/Install battery now !
Formatting
COM3 [VCP0] selected
module v3.26
Action: reset settings ("format ffs")
Model: Autodetect 6253 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6253:8A02:8A00]...
CPU: MT6253
high speed boot On
chip: 0000:0000:000F
status: FF
Connecting at 19200, wait...
warning: wrong packet cs
Release Power button now !
Phone detected, wait...
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
warning: wrong packet cs
warning: can't read software version, probably unknown firmware
detecting structure #2...
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18warning: wrong packet cs
19 20 21 22 23 24 25 26 27warning: wrong packet cs
28 29 30 31 32 33 34 35error: detection failed (36 tries), read flash and send to support
warning: wrong packet cs
connection lost
error: operation failed !
Finished, time used: 15 sec
Remove/Install battery now !
Gives error but now phone is working