Use cable GS101
Code:
COM3 [VCP0] selected
module v3.73
Device: Vodafone-547
Checking data, wait...
Action: write flash NAND
write: Firmware
editor_corrected_editor_corrected_editor_corrected_Vodafone-547_ZTENJ35_09A_PCB01_GPRS_MT6235B_S01.VF_GER_DE_P107A4V1_2_0B05_2010-06-18_En_De.B4M.bin.B4M.bin.B4M.bin.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
nfi area detection...
nfi scat area detected (3 areas)
nfi area detection (3 cores) finished: Ok
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/01C00000
firmware size: 32Mb
ffs size: 28Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: VF_GER_DE_P107A4V1.2.0B05
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: ZTENJ35_OG_09A_BOOTLOADER_V005_MT6235B_ORANGE_ENG_EN_P107A3V1_0_
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: ZTENJ35_09A_PCB01_GPRS_MT6235B_S01.VF_GER_DE_P107A4V1_2_0B05.BIN
project-id: VF_GER_DE_P107A4V1.2.0B05, 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/01C00000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
nfi area detection...
nfi scat area detected (3 areas)
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
done
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
write core...
Disconnect...
done
Finished, time used: 6 min 56 sec
Remove/Install battery now !
Phone was flashed with corrected firmware in LangPack Editor
BR