COM2 [VCP0] selected
module v3.73
Device: Spice-S404N
Checking data, wait...
advanced flash detection enabled
Action: "sp-unlock"
unlock method: standard
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6205:8B00]...
CPU: MT6205
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC22A000000000:18E59F00000000
flash: Samsung AMD/Fujitsu std [T 0008x002000 003Fx010000] 4Mb
otp offset: 003F0000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
115200
Set baud Done
====> Initialize bootcode ...
interesting cpu type found
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
.
search rom info finished
searching rom info...
.
search rom info finished
warning: rom info information not found, possible reasons:
- old firmware type w/o rom info information
- empty (completely or partially erased) flash chip
- damaged firmware
- damaged hardware (bad soldered or damaged flash chip)
> if phone works fine just ignore this warning <
ffs/eeprom address can not be detected, value from database assigned: 00300000/00100000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: Spice-S404N__ffs...
file saved: C:\Program Files\InfinityBox\MModule\Spice-S404N__ffs_20110202-181222.B0E.bin
flash: EC22A000000000:18E59F00000000
Backup required data Done
====> Patch required data ...
detection procedure, wait...
detection procedure completed
Patch required data Done
====> Special operation ...
detecting parameters to apply patch area 1...
................
error: area 1 can not apply patch
detecting parameters to apply patch area 2...
................
error: area 2 can not apply patch
detecting parameters to apply patch area 3...
................
error: area 3 can not apply patch
detecting parameters to apply patch area 4...
.....
required data found
flash: EC22A000000000:18E59F00000000
flash: EC22A000000000:18E59F00000000
Write: area 4 (pass 1)
...........
area 4 patch applied Ok
Special operation Done
====> Write ...
flash: EC22A000000000:18E59F00000000
Write: ffs
Write Done
====> Finalization ...
Finalization Done
Finished, time used: 3 min 58 sec
Remove/Install battery now !
