[Dzirt]

C1-01, RM-607

Connect phone on selected interface...

Dead Mode is Selected
Waiting for USB device...
--- Press phone's power button or insert charger! ---
Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready
Sending Algo , CC
Algo sent Ok
BL : Quantum_Bootloader_10.37_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!

   ===Flashing [MCU]===
File : rm607__03.35.mcusw
Image : rm607__03.35.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ... 
Erase done
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00040000
Erasing, wait ... 
Erase done
Write , Start : 0x40040000 , Len : 0x00040000
Flashing , wait ...
Region flash done
Processing Region 3/5
Erase , Start : 0x40080000 , Len : 0x00020000
Erasing, wait ... 
Erase done
Write , Start : 0x40080000 , Len : 0x00020000
Flashing , wait ...
Region flash done
Processing Region 4/5
Erase , Start : 0x400A0000 , Len : 0x00100000
Erasing, wait ... 
Erase done
Write , Start : 0x400A0000 , Len : 0x00100000
Flashing , wait ...
Region flash done
Processing Region 5/5
Erase , Start : 0x40400000 , Len : 0x01800000
Erasing, wait ... 
Erase done
Write , Start : 0x40400000 , Len : 0x01780000
Flashing , wait ...
Region flash done

   ===Flashing [PPM]===
File : rm607__03.35.ppm_i
Image : package_i.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00600000
Erasing, wait ... 
Erase done
Write , Start : 0x41C00000 , Len : 0x0038D150
Flashing , wait ...
Region flash done

   ===Flashing [CNT]===
File : rm607__03.35.image_i_0595568
Image : package_i_0595568.image.fls
Cert block found, sending....
Cert sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42200000 , Len : 0x01C60000
Erasing, wait ... 
Erase done
Write , Start : 0x42200000 , Len : 0x00B80000
Flashing , wait ...
Region flash done
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ... 
Erase done
No write data, skip

Flashing done, rebooting...
-> Infineon info : Do FullFactory Sets after flashing
Flashing Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info...  - Ok

Reading Phone Info....
Connected phone -    C1-01
Software ver : V 03.35 02-12-10 RM-607 (c) Nokia            
IMEI    :      355962040592869
Ape Ver :      
APE Var :      
APE ADSP:      
DSP Ver :      
APE Test:      
PPM     :      V 03.35 02-12-10 RM-607 (c) Nokia             I
CNT     :      Content: i_0595568 V 03.35 02-12-10 RM-607 (c) Nokia            
Product SN   :     HUC372416
Product code :     0595568
Base Prd.code:     0585582
Module code  :     0204427
Long Prod.SN :     0
Hardware info=======
HWID  : 1001
Retu  : 
Tahvo : 
Batery: 3699 mV
Camera: 
CMT BT: 19b5-22012
APE BT: 
APE HW: 
LCDVer: TPO
RF ic : 
Lock info ===========
IMEI       : 355962040592869
IMEI spNet : 3A 55 69 02 04 95 82 06 
IMEI svNet : 33 55 69 02 04 95 82 06 F7 

Conf key     : 8BE700080700797A
Provider key : 0040000005F4AC52
Provider    : Unknown Provider
Counters   : Key 0  [3] , Fbus 0  [10]
Blocks      : 0
=============================
LOCKS :  Damaged! 
=============================
CRT308 Backup Created... :)

User Code : 12345
MMC pwd  : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery] 

Done!