GSM-Forum - View Single Post - plz help me new prosaser external RAM: S_DA_RAM_ERROR

mobiletuch · 02-09-2011, 10:12

COM3 [VCP0] selected
module v3.26
Device: Autodetect 6253 NOR
Checking data, wait...
Action: reset settings ("format ffs") NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[0093]: 0089:890300000000 [INTEL] PF38F30xxM0x1xx
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_EXIST/00000108
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
detect sec ro...
detect custom parameters...
detect project-id...
detect NOR info...
number of areas/bytes to read: 1:00040000
reading (HW_STORAGE_NOR)...
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
code offset: 00000000
===> done
Format...
error: can not format: 0BFA:S_DA_HANDSET_FAT_INFO_NOT_FOUND
warning: can not format: HW_STORAGE_NAND is not present
Format...
error: can not format: 0BFA:S_DA_HANDSET_FAT_INFO_NOT_FOUND
error: last error: 0BFA:S_DA_HANDSET_FAT_INFO_NOT_FOUND
Disconnect...
done
Finished, time used: 1 min 14 sec
Remove/Install battery now !

02-09-2011, 10:12	#1 (permalink)
mobiletuch No Life Poster Join Date: Aug 2009 Location: faisalabad PAKISTAN Posts: 1,426 Member: 1092450 Status: Offline Thanks Meter: 196	plz help me new prosaser external RAM: S_DA_RAM_ERROR COM3 [VCP0] selected module v3.26 Device: Autodetect 6253 NOR Checking data, wait... Action: reset settings ("format ffs") NAND interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 3.2/3.2 CPU: 6253:8A02:8A00 status: FF bbchip bl ver: FE NOR flash id[0093]: 0089:890300000000 [INTEL] PF38F30xxM0x1xx chip size: 16Mb otp status/size: S_DA_NOR_OTP_EXIST/00000108 NAND flash chip: not installed internal RAM size: 00020000 external RAM: S_DA_RAM_ERROR done Set baudrate (115200)... done ram test... testing... ram test passed ===> detect existing firmware structure... detect ffs... detect sec ro... detect custom parameters... detect project-id... detect NOR info... number of areas/bytes to read: 1:00040000 reading (HW_STORAGE_NOR)... warning: ffs can not be detected TCL-ID detection... TCL-ID detection done startup code area #1 detection... startup code area #1 detection done code offset: 00000000 ===> done Format... error: can not format: 0BFA:S_DA_HANDSET_FAT_INFO_NOT_FOUND warning: can not format: HW_STORAGE_NAND is not present Format... error: can not format: 0BFA:S_DA_HANDSET_FAT_INFO_NOT_FOUND error: last error: 0BFA:S_DA_HANDSET_FAT_INFO_NOT_FOUND Disconnect... done Finished, time used: 1 min 14 sec Remove/Install battery now !