View Single Post
Old 02-14-2011, 17:11   #2 (permalink)
raja cellular
Junior Member
 
Join Date: Jun 2010
Posts: 9
Member: 1325652
Status: Offline
Thanks Meter: 1
==== C:\Program Files\InfinityBox\MModule\MModule.exe [2/14/2011 5:07:51 PM] ====
web site: Infinity-Box - About

Loading data, wait...
[Infinity Box] MModule v3.70
smart-card: connected
S/N: 9EC2:0116
Wait...
Device: Alcatel-V222X, V222A
Done
Action: read/check information
Model: Alcatel-V222X, V222A
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
Hardware version: MT6223, E05
Hardware version: KONKA23C_6432_QVGA_09A_HW
Software version: KAAM7026E_LW_EN_IN_2
Software date: 2000.00.00
Barcode: 911994329
imei-1: 353813021205877
imei-2: 353813021205878
imei-3: 353813021205877
Finished, time used: 9 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?
aborted by user
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?

==== [2/14/2011 5:08:39 PM] ====
COM3 [VCP0] selected
module v3.70
Device: Alcatel-V222X, V222A
Checking data, wait...
advanced flash detection enabled
Action: reset settings ("format ffs")
Do you want to make ffs/eeprom backup before format ?
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 3 sec
Remove/Install battery now !
WARNING ! Settings will be cleared, user data erased, Imei set to default value !
Make flash backup before this procedure !

Do you want to continue ?

==== [2/14/2011 5:09:08 PM] ====
COM3 [VCP0] selected
module v3.70
Device: Alcatel-V222X, V222A
Checking data, wait...
advanced flash detection enabled
Action: reset settings ("format ffs")
Do you want to make ffs/eeprom backup before format ?
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:6120:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
error: unexpected termination/freez: 00000000
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (07)
TCL-ID is absent
====================
New firmware found (v.3.70, database date: 13.01.2011):
M7026E_LW_PCB01_GPRS_MT6223P_S00.KAAM7026E_LW_EN_I N_2_0_C02.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info ver: 07
sw version: M7026E_LW_PCB01_GPRS_MT6223P_S00.KAAM7026E_LW_EN_I N_2_0_C02.BIN
project-id: KAAM7026E_LW_AXIS_2.01.B05, 00000000
code offset: 00000000
ffs offset/size [02]: 00720000/000E0000
rom info structure: [standard] type (07)
TCL-ID is absent
ffs/eeprom address assigned: 00720000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: Alcatel-V222X,V222A_M7026E_LW_PCB01_GPRS_MT6223P_S00.KAAM7 026E_LW_EN_IN_2_0_C02__ffs...
file saved: C:\Program Files\InfinityBox\MModule\Alcatel-V222X,V222A_M7026E_LW_PCB01_GPRS_MT6223P_S00.KAAM7 026E_LW_EN_IN_2_0_C02__ffs_20110214-171004.B0E.bin
original imei: FFFFFFFFFFFFFF
flash: EC257E25062501:2AEA0000000000
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Write Done
====> Finalization ...
ffs formatting...
flash: EC257E25062501:2AEA0000000000
Finalization Done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Alcatel-V222X,V222A_M7026E_LW_PCB01_GPRS_MT6223P_S00.KAAM7 026E_LW_EN_IN_2_0_C02__system_log__00000000_201102 14-171014.B0X.bin
Finished, time used: 1 min 3 sec
Remove/Install battery now !
Loading file v.02...
Alcatel-V222X,V222A_M7026E_LW_PCB01_GPRS_MT6223P_S00.KAAM7 026E_LW_EN_IN_2_0_C02__ffs_20110214-171004.B0E.bin loaded

Last edited by InfinityHelp; 06-27-2020 at 10:16. Reason: legacy links removed
  Reply With Quote
 
Page generated in 0.10493 seconds with 7 queries