flashing ok but why not getting info or details
Code:
COM10 [VCP0] selected
module v3.26
Device: Autodetect 6253 NOR
Checking data, wait...
Action: write flash
write: Firmware
Micromax-X265_WBG1000C_0101_PCB01_GPRS_MT6253_S00.1000C_0101_V1825.BIN_FLNPF38F3050M0Y3DF.B0M.bin
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Micromax-X265_ffs_01.B0E.bin
nor area detection...
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[0093]: 0089:890300000000 [INTEL] PF38F30xxM0x1xx
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_EXIST/00000108
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 00000000/00000000
detect sec ro...
detect custom parameters...
detect project-id...
project-id: 1000C_0101_V1825
detect NOR info...
number of areas/bytes to read: 1:00040000
reading (HW_STORAGE_NOR)...
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
code offset: 00000000
===> done
startup code area #1 check...
done
number of cores: 2
loading files...
number of areas: 2
done
write...
write core...
Disconnect...
done
Finished, time used: 5 min 31 sec
Remove/Install battery now !