[mentari]

hi.

@ infinity support.

i want to read china phone on MTK6253 nor chip, but no success.

here is the logs.

COM6 [VCP0] selected
module v3.26
Device: Autodetect 6253 NOR
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C1]: 00EC:240400000000 [SAMSUNG] K5N2833ATB
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_NOT_SUPPORT/00000000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
error: can not set baudrate (921600): 0FA6:S_FT_CHANGE_BAUDRATE_FAIL
error: last error: 0FA6:S_FT_CHANGE_BAUDRATE_FAIL
Disconnect...
done
Finished, time used: 39 sec
Remove/Install battery now !

Note : already change baud rate to 1152, 2300, 4800 same results.

thank you.