View Single Post
Old 02-18-2011, 11:14   #1 (permalink)
hicmet
Freak Poster
 
hicmet's Avatar
 
Join Date: Jan 2006
Location: RSA/HONG KONG/SHENZHEN/BNGKOK
Age: 41
Posts: 372
Member: 225128
Status: Offline
Sonork: 1602598
Thanks Meter: 25
Question my atf box keep saying update firmware

i update everytime but it still keep saying update firmware when i open prog.INIT : FAILED , CHECK YOUR BOX FIRMWARE.========================================= =====
ATF Box is not in USB 2.0 Mode
==============================================

* Go to "Product Support" tab and click the
* "Restore Box" Button to fix the Box Firmware

** If Problem is Not Solved...
1. Make Sure you are NOT using USB HUBS
2. Make Sure your USB port is USB 2.0
3. Make Sure you are using the latest Drivers

*** If Problem is STILL Not Solved
1. Use a THICKER USB Cable
2. Connect ATF Directly to the Root USB Port
3. Uninstall Drivers, Reboot PC, Reinstall

**** If you are still Stuck...
1. Search your entire PC for "ftdibus.sys
2. Delete all "ftdibus.sys" files you find
3. Reboot PC...
4. Disconnect ATF Box and all Boxes from PC
5. Run C:\AdvanceBox Turbo Flasher\Driver\Remove_ATF_Drivers\Remove_ATF_Drive rs.bat
6. ReInstall ATF Software
7. Connect ATF Box Only to your USB Port
8. Install the Correct Drivers

******************************************
INIT : FAILED , CHECK YOUR BOX FIRMWARE
******************************************
 
 
Page generated in 0.09211 seconds with 7 queries