Successfully Unlocked G-3610 COM3 [Serial2] selected
module v3.75
Action: read unlock codes
unlock method: read codes
Model: Huawei-G3610
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:5D21:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: G3610_V100R001B001C204SP03S
Version: L75_HW
80 byte(s) read
imei: 35398504419168
connection Ok
185 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
173 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 12345678
lock[2] code: + 56781234
lock[3] code: + 1122
lock[4] code: - 3344
lock[5] code: - 5566
lock[6] code: + 7788
lock[7] code: + 9900
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone
- read unlock codes
- restore original imei
Finished, time used: 13 sec
Remove/Install battery now !
Just Write
lock[1] code: + 12345678
In Np Code and its finished ..
i have done 5 sets today
Thanks Infinity For this Great Jobs.... |