Quote:
Originally Posted by akskbn Phone is locked please contact service center.
I solder pic 2 pin3 and gnd. but phone not conected....?
COM4 [VCP0] selected
module v1.45
Device: Samsung-SCH-S259, S269, S299
operation: Rebuild EFS/NV
Phone should be Switched ON !
connecting...
Connecting, wait...
error: can't activate test mode
If phone can not be connected after several tries make this:
1. Insert original sim card in phone
2. Power-On phone
3. go to Menu, press 6 then * and type password 123456
4. go to "Port Map", HKF
5. select "UART1"
error: operation failed
Finished, time used: 26 sec |
Hello,
Check Cable,Check Comport ,Check Weather UR Phone Connected Well Or Not Better Try To Solder Wires On Back Pinout's Already Included In Shell
Wbr
<<<Megatron>>>