GSM-Forum - View Single Post

**Risan Fassy** · 02-27-2011, 08:17

First G6620 done
Used gs101 cable

COM14 [VCP0] selected
module v3.77
Action: read unlock codes
unlock method: read codes
Model: Huawei-G6620
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6253:8A02:8A00]...
CPU: MT6253
chip: 0000:0000:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6253,E02
Date: 2000.00.00
Version: 1.0
Version: G6620SS.C200.M40.04.10
Version: CKT53_12832_09B_HW
116 byte(s) read
imei: 351XXXXXXXXXX
connection Ok
217 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
205 byte(s) read
reading data...
220 byte(s) read
lock[1] code: + 36498824
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone
- read unlock codes
- restore original imei
Finished, time used: 22 sec
Remove/Install battery now !

02-27-2011, 08:17	#1 (permalink)
Risan Fassy Product Manager Join Date: Oct 2007 Location: Sri Lanka-Beruwala Posts: 246 Member: 617198 Status: Offline Sonork: 100.1606436 Thanks Meter: 214	Huawei g6620 unlock done First G6620 done Used gs101 cable COM14 [VCP0] selected module v3.77 Action: read unlock codes unlock method: read codes Model: Huawei-G6620 Checking data, wait... Phone should be Switched OFF ! Press and HOLD Power button now ! 19200 autodetect Initializing [6253:8A02:8A00]... CPU: MT6253 chip: 0000:0000:000F status: FF Connecting at 19200, wait... Release Power button now ! Phone detected, wait... Hardware: MT6253,E02 Date: 2000.00.00 Version: 1.0 Version: G6620SS.C200.M40.04.10 Version: CKT53_12832_09B_HW 116 byte(s) read imei: 351XXXXXXXXXX connection Ok 217 byte(s) read 38 byte(s) read Phone lock: Off Phone code: 1234 205 byte(s) read reading data... 220 byte(s) read lock[1] code: + 36498824 lock[2] code: + default lock[3] code: + 1122 lock[4] code: - default lock[5] code: - default lock[6] code: + default lock[7] code: + default if code is not accepted by phone: - make full flash backup for emergency case - flash phone with good eeprom file - Power-On phone without sim-card - Power-Off phone - read unlock codes - restore original imei Finished, time used: 22 sec Remove/Install battery now !