[jumper-master]

====> Patch required data ...
................................
lock area found
................................
lock area found
Patch required data Done
====> Special operation ...
detecting parameters to apply patch area 1...
..............................
required data found
flash: C2227E22212201:2AEA0000000000
flash: C2227E22212201:2AEA0000000000
Write: area 1 (pass 1)
required data found
flash: C2227E22212201:2AEA0000000000
flash: C2227E22212201:2AEA0000000000
Write: area 1 (pass 2)
..................................
area 1 patch applied Ok
Special operation Done
====> Write ...
flash: C2227E22212201:2AEA0000000000
flash: C2227E22212201:2AEA0000000000
Write: lock-area-1
flash: C2227E22212201:2AEA0000000000
flash: C2227E22212201:2AEA0000000000
Write: lock-area-4
Write Done
====> Finalization ...
Finalization Done
Finished, time used: 1 min 27 sec
Remove/Install battery now !

the same problem like MF6201



and this log i read code


imei: 86515500010991
connection Ok
192 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
180 byte(s) read
reading data...
972 byte(s) read
building new data...
writing data...
verifying...
verification Ok
done
Finished, time used: 24 sec
Remove/Install battery now !

Your phone seem UNLOCKED if NOT than 1st use READ CODES METHOD if not work than you can use ChineseMiracle because your phones CPU is 6223.


BR