Quote:
Originally Posted by AbDuLlAH kHaWaR i did unlok it but it IS showing limit service...
i have no backup....i did write repair eprom but same problem plz help...
thanx
AK' |
Try with this
O2X1i_repair_eeprom_01.37E.rar
O2X1i_repair_eeprom_02.37E.rar
O2XLI_repair_eeprom_01.37E.rar
if not work then try this
U Can Unlock Without Risk(Dont Worry If Module Shows Probably Wrong Model Selected) just Press Continue Hope Flashing Supported Will Be Soon
Just Select Model BenQ-Siemens----> S660C And Cable L4A
here is log
Application: C:\Program Files\InfinityBox\BModule\BModule.exe
Loading data, wait...
[Infinity Box] v1.31
S/N: 6A81:0112
Wait...
Device: O2X1i,O2XLI
Done
Device: BenQ-S660C
==== log: [4/21/2009 4:57:03 PM] ====
COM2 [VCP1] selected
module v1.31
Device: BenQ-S660C
Checking data, wait...
Action: unlock
Boot...
Phone should be Switched OFF !
Press Power button now !
Connecting...
Boot Done
Check Connection...
Check Connection Done
Set Baud...
812500
Set Baud Done
Check Flash...
error: Probably wrong model selected.
Continue anyway ?
Check Flash Done
Check Parameters...
Flash: 0089:88C500010001
file saved: C:\Program Files\InfinityBox\BModule\eeprom-00_20090421-165727.78F.bin
file saved: C:\Program Files\InfinityBox\BModule\eeprom-01_20090421-165733.78F.bin
file saved: C:\Program Files\InfinityBox\BModule\eeprom-02_20090421-165735.78F.bin
file saved: C:\Program Files\InfinityBox\BModule\eeprom-03_20090421-165737.78F.bin
file saved: C:\Program Files\InfinityBox\BModule\eeprom-04_20090421-165740.78F.bin
Check Parameters Done
Check Space...
Flash: 0089:88C500010001
flash: Intel I28F320C3B-B B 4Mb
Check Space Done
Check Data...
Check Data Done
Erasing...
erase operation not required
Erasing Done
Writing...
Flash: 0089:88C500010001
Flash: 0089:88C500010001
Flash: 0089:88C500010001
Flash: 0089:88C500010001
Flash: 0089:88C500010001
Writing Done
Finished, time used: 47 sec
Remove/Install battery now !