View Single Post
Old 03-17-2011, 22:00   #6 (permalink)
InfinitySupport
Product Manager
 
Join Date: Mar 2005
Location: infinity-box
Posts: 38,635
Member: 130995
Status: Offline
Thanks Meter: 35,229
Quote:
Originally Posted by khalid mobile View Post
COM6 [VCP0] selected
module v3.75
Action: read unlock codes
unlock method: read codes
Model: Huawei-G3610
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:4655:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: G3610_V100R001B001C19SP03S
Version: L75_HW
80 byte(s) read
imei: 35398504430088
connection Ok
185 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
173 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 07882419
lock[2] code: + 56781234
lock[3] code: + 1122
lock[4] code: - 3344
lock[5] code: - 5566
lock[6] code: + 7788
lock[7] code: + 9900
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone
- read unlock codes
- restore original imei
Finished, time used: 2 min 15 sec
Remove/Install battery now !
Thank you very much for test report !
Each test report with attached logs is very important for us
so we can see how is Infinity-Box software works, what is phone hardware configuration (f.e. flash chip type)
and what is possible problems (so we will be able to fix it) and successfully done work.
  Reply With Quote
 
Page generated in 0.07816 seconds with 7 queries