| Welcome to use McnBox!
Selected COM63
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCNXXXXXXXXXXXXXX
Firmware V1.09
Checksum XXXX-XXXX
Box Connected!
Ready working at COM63
-------------------------------
Start Scanning...
->......
Results:
MTK Chipset CPU: MT6235.
GND:10,RXD:3,TXD:1,BOOT:2
[G:10 R:3 T:1 Up:2] Apply to Box
[G:10 R:3 T:1 Up:2] Apply to Box
Press and Holding Power button now !
Connecting, wait...
Phone detected, wait..
CPU: 6235 Ver: 8A04 SW:8A01
CPU ID: 00000300
Initialize Boot4 ...
Flash(Nand) Type [HYNIX] H8BCS0PG0MBP
Flash(Nand) Code 00AD00A1(00800015)
Flash(Nand) Size 0x08400000 Hex Bytes
Press and Holding Power button now !
Connecting, wait...
CPU: 6235 Ver: 8A04
CPUID: 00000300
Release Power Button now
Phone detected
Infr: MT6235_IM640_A2_TH-T001[C2098_V3_2_1]_CELLONSZ35_09A_HW_Melody_V0.0
NV Data saved to: F:\SOFT WARE ALL-BOX\McnPro Box\IMOBILE640_NV_MT6235_IM640_A2_TH-T001[C2098_V3_2_1]_CELLONSZ35_09A_HW_Melody_V0.0
Backup Done.
THANKS FOR NEW UPDATE.
B.R.,
|