c1-01 successful usb flash with best tool v1.18.5c
here is log
card found: S/N 0D81:0118
registered to: master mobiles
DLL not found...
Connect phone on selected interface...
Core version : 1.18 , Rev : 3.0
Selected FlashSettings : SafeFlash
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm607__03.35.mcusw
PPM : rm607__03.35.ppm_m_c
Flashing phone now...
Check files done...
-> SWversion check skipped : Dead mode selected
Dead Mode is Selected
Waiting for USB device...
-> If Windows say "Unrecognized device" - just reinsert battery
-> If flashing freeze - reinsert cable and try again
--- Press phone's power button or insert charger! ---
Connection opened successfully
DBG : F00A1FB300020303010100FF
CPUID : XGOLD 213
2nd boot Ok, 01
2nd ready, AA
Sending Algo
Algo sent Ok
BL : Quantum_Bootloader_10.37_M1S1
Speed accepted, use 6.500.000
FLASHID : 89008289
FLIC conf set, RST set
Boot done!
===Flashing [MCU]===
File : rm607__03.35.mcusw
Image : rm607__03.35.mcusw_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:01
Write , Start : 0x40040000 , Len : 0x00040000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40080000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40080000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 4/5
Erase , Start : 0x400A0000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:05
Write , Start : 0x400A0000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 5/5
Erase , Start : 0x40400000 , Len : 0x01800000
Erasing, wait ...
Erase done, time : 00:02:07
Write , Start : 0x40400000 , Len : 0x01780000
Flashing , wait ...
Region flash done, time : 00:00:34
===Flashing [PPM]===
File : rm607__03.35.ppm_m_c
Image : package_m_c.ppm_ebl_psi.fls
Cert block found, sending....
Cert sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41C00000 , Len : 0x00600000
Erasing, wait ...
Erase done, time : 00:00:16
Write , Start : 0x41C00000 , Len : 0x00319A48
Flashing , wait ...
Region flash done, time : 00:00:03
Flashing done!
Total flash time : 00:03:13
Reboot phone now...
Reading Phone Info....
Connected phone - C1-01
Software Info: V 03.35 02-12-10 RM-607 (c) Nokia
IMEI: 356258046581033
PPM version : V 03.35 02-12-10 RM-607 (c) Nokia M_C
Product code: 0596379
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Checking User Certificates...
Total - 39 certs
Data exist, skip certificate repair...
AfterFlash operations done... Reconnect, wait...
Done!
Connect phone on selected interface...
Elapsed: 00:03:40
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Resetting selected items...
Check phone mode...
Phone already in Test mode, skip change...
Settings Full Factory Defaults...
Set OK!
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!
Elapsed: 00:00:20
Backup Certificates now...
Backup CRT308 data...
CRT308 Backup Created...
Check communication with phone....
Reboot....
Connection opened successfully
Waiting for communication response...
[BB5 FLASH]: Can't verify Bootrom
Try again...
-> Error answer from BootRom
Looks like ASIC not supported, or HW failure
Supported : RapuYama, RAP3Gv4, BroadComm
Try Flash latest SW and repeat, if phone in supported list
SimLock Data saved...
SimLock Key saved...
RPL saved : c:\InfinityBox\BEST\Backup\Cert\356258046581033_SI M.rpl
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok