View Single Post
Old 03-23-2011, 11:36   #72 (permalink)
ranen telecom
Freak Poster
 
Join Date: Mar 2011
Posts: 132
Member: 1536420
Status: Offline
Thanks Meter: 42
format spd ok

Welcome to use McnBox!
Selected COM21
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN*********
Firmware V1.09
Checksum *********
Box Connected!
Ready working at COM21
Scanning pin status,please waiting...
->........................
Pin-status Scan Done
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOTŁ؛2 3 4 5 10 11 12
USB D-: 7 USB D+: 8 Spread
Press [ Save ] to save Pinout
Total expend 1 seconds
...
->#...........
...
Press [ Save ] to save Pinout
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
If Scan other phone, please click [Stop]
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
Boot Not support,Please Try other boot.
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810(FFFFFFFF)
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Start Writing...
Write Done!
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
Boot Not support.
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Check firmware,Wait...
Analyzed Completed.
Factory Setting...
Done.
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Start Writing...
Write Done!
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Reapply Pinouts to Box or Pwr on/off
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Check firmware,Wait...
Analyzed Completed.
Factory Setting...
Done.
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Start Writing...
Write Done!
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Reapply Pinouts to Box or Pwr on/off
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
[G:1 3 9 11 D-:7 D+:8 Up:2 4 5 10 12] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 00208810
Flash Model ST M58WR064ET
Flash Size 0x800000(8.0M)
Check firmware,Wait...
Done..
Start Formatting,Wait...
Start Addr:7A0000 Size:40000
Format Done.
  Reply With Quote
The Following User Says Thank You to ranen telecom For This Useful Post:
 
Page generated in 0.14957 seconds with 6 queries