thread: huawei g 3510
View Single Post
Old 03-28-2011, 08:38   #2 (permalink)
GFTELECOM
No Life Poster
 
GFTELECOM's Avatar
 
Join Date: Dec 2008
Location: some were in my head
Age: 42
Posts: 1,036
Member: 922273
Status: Offline
Sonork: 100.1583612
Thanks Meter: 119
Loading data, wait...
[Infinity Box] MModule v3.80
smart-card: connected
S/N:
Wait...
Device: Huawei-G3510
Done

==== [24/03/2011 22:09:17] ====
COM3 [VCP0] selected
module v3.80
Action: "sp-unlock"
unlock method: smart fast
Model: Huawei-G3510
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:7B8F:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: G3510_V100R001B001C102SP04
Version: L80_HW
====================
New firmware found (v.3.80, database date: 20.03.2011):
G3510_V100R001B001C102SP04

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
80 byte(s) read
imei: 35398404101921
connection Ok
185 byte(s) read
reading data...
reading data #2...
building new data...
writing data...
173 byte(s) read
reading data...
972 byte(s) read
building new data...
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
writing data...
verifying...
verification Ok
done
Finished, time used: 26 sec
Remove/Install battery now !

==== [24/03/2011 22:15:25] ====
COM3 [VCP0] selected
module v3.80
Device: Huawei-G3510
Checking data, wait...
advanced flash detection enabled
Action: read ffs/eeprom
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 6 sec
Remove/Install battery now !

==== [24/03/2011 22:16:04] ====
COM3 [VCP0] selected
module v3.80
Device: Huawei-G3510
Checking data, wait...
advanced flash detection enabled
Action: read ffs/eeprom
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:7B8F:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 208848FFFFFFFF:20884800000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
otp offset: 007F0000
detecting chip #01 in region #00...
flash: 208848FFFFFFFF:20884800000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
otp offset: 007F0000
number of flash chip/regions detected: 02/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (05)
TCL-ID is absent
====================
New firmware found (v.3.80, database date: 20.03.2011):
G3510MOOV_PCB01_GPRS_MT6223P_S00.G3510_V100R001B00 1C102SP04.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info ver: 05
sw version: G3510MOOV_PCB01_GPRS_MT6223P_S00.G3510_V100R001B00 1C102SP04.BIN
project-id: G3510_V100R001B001C102SP04, 00000000
code offset: 00000000
ffs offset/size [01]: 00700000/00100000
rom info structure: [standard] type (05)
TCL-ID is absent
ffs/eeprom address assigned: 00700000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: Huawei-G3510_G3510MOOV_PCB01_GPRS_MT6223P_S00.G3510_V100R 001B001C102SP04__ffs...
file saved: D:\InfinityBox\MModule\Huawei-G3510_G3510MOOV_PCB01_GPRS_MT6223P_S00.G3510_V100R 001B001C102SP04__ffs_20110324-222059.B0E.bin
Finished, time used: 41 min 46 sec
Remove/Install battery now !

==== D:\InfinityBox\MModule\MModule.exe [25/03/2011 08:51:48] ====
Infinity-Box - About

Loading data, wait...
[Infinity Box] MModule v3.80
smart-card: connected
S/N:
Wait...
Device: Huawei-G3510
Done
Loading file v.02...
Huawei-G3510_ffs_02.B0E.bin loaded

==== [25/03/2011 08:54:39] ====
COM3 [VCP0] selected
module v3.80
Device: Huawei-G3510
Checking data, wait...
advanced flash detection enabled
Action: write flash
"smart write" active
"format ffs" active
skip: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Huawei-G3510_ffs_02.B0E.bin
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:7B8F:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 208848FFFFFFFF:20884800000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
otp offset: 007F0000
detecting chip #01 in region #00...
flash: 208848FFFFFFFF:20884800000000
flash: ST Intel std [def 007Fx010000 0008x002000] 8Mb
otp offset: 007F0000
number of flash chip/regions detected: 02/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (05)
TCL-ID is absent
====================
New firmware found (v.3.80, database date: 20.03.2011):
G3510MOOV_PCB01_GPRS_MT6223P_S00.G3510_V100R001B00 1C102SP04.BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info ver: 05
sw version: G3510MOOV_PCB01_GPRS_MT6223P_S00.G3510_V100R001B00 1C102SP04.BIN
project-id: G3510_V100R001B001C102SP04, 00000000
code offset: 00000000
ffs offset/size [01]: 00700000/00100000
rom info structure: [standard] type (05)
TCL-ID is absent
ffs/eeprom address assigned: 00700000
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
Backup required data Done
====> Patch required data ...
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
Area: Eeprom/ffs
flash: 208848FFFFFFFF:20884800000000
Write: Eeprom/ffs
sec info (fast) detection...
searching sec info#1...
.
search sec info#1 finished
Write Done
====> Finalization ...
ffs formatting...
flash: 208848FFFFFFFF:20884800000000
error: wrong erase first sector at 0x00A00000
error: format ffs failed
Finalization Fail
Finished, time used: 4 min 36 sec
Remove/Install battery now !

Last edited by InfinityHelp; 06-27-2020 at 10:13. Reason: legacy links removed
  Reply With Quote
 
Page generated in 0.10073 seconds with 7 queries