GSM-Forum - View Single Post

sekharv · 03-31-2011, 05:51

haier c2076 first flashed with factory flasher ver f ,,then unlocked in cdma tool
in both software forced boot by pressing green and red buttons.

COM91 [QCUSB_COM91_2] selected
module v1.43
Device: Haier-C2076
operation: SP-unlock (DIAG-mode disabled)
Phone should be Switched ON !
connecting...
Check conection...
OK...
Sending command...
Sending command 30%...
Sending command 60%...
Sending command 90%...
Sending command 100%...
Checking version...
C2076-VM-V0.3.3 selected..
patching in progres...
patching in progres 50%...
patching in progres 95%...
patching in progress 100%...
Done...
Phones should restart now...
Finished, time used: 15 sec

thanku INFINITY TEAM tku

03-31-2011, 05:51	#1 (permalink)
sekharv Freak Poster Join Date: Feb 2007 Location: hyderabad Posts: 392 Member: 455693 Status: Offline Thanks Meter: 48	haier c2076 done.... haier c2076 first flashed with factory flasher ver f ,,then unlocked in cdma tool in both software forced boot by pressing green and red buttons. COM91 [QCUSB_COM91_2] selected module v1.43 Device: Haier-C2076 operation: SP-unlock (DIAG-mode disabled) Phone should be Switched ON ! connecting... Check conection... OK... Sending command... Sending command 30%... Sending command 60%... Sending command 90%... Sending command 100%... Checking version... C2076-VM-V0.3.3 selected.. patching in progres... patching in progres 50%... patching in progres 95%... patching in progress 100%... Done... Phones should restart now... Finished, time used: 15 sec thanku INFINITY TEAM tku