@GSM SKILS
No it does not say "BOX NOT FOUND" because MPROG is not LOOKING for a BOX.
Anyway,
1. Disconnect all other GSM BOXES FROM your PC.
2. Disconnect ATF Box as well.
3. Make sure you disconnect all GSM Boxes from your PC.
4. Repeat STEP 1-2-3 until all GSM Boxes are disconnected from your PC.
5. Run this:
C:\AdvanceBox Turbo Flasher\Driver\Remove_ATF_Drivers\Remove_ATF_Drive rs.bat
6. Connect ATF Box and go to Device Manager...
7. Update USB to Serial Converter A and B with latest FTDI Drivers from here:
http://www.ftdichip.com/Drivers/CDM/CDM20812.zip
8. After you Updated your USB to Serial Converter Drivers...
Follow what I posted in POST #2
9. Now after you reprogram your ATF box, disconnect it from the USB Port and Connect
it back after 5 seconds...
10. Use Drivers here:
C:\AdvanceBox Turbo Flasher\Driver\ATF_NEW_DRIVERS\