Micromax Q5 Dead After Flash Before Flashing Set hang On Opening Camera But After Flashing handset Dead Log Here
COM2 [VCP0] selected
module v3.62
Device: Micromax-Q5
Checking data, wait...
Action: write flash NAND
write: Firmware
Micromax-Q5_TINNO35_09A_PCB01_GPRS_MT6235B_S01.E521_MP_F1_I N_MMX_05_08_2010-01-09_En_ver2.B4M.bin
skip: Customization/Language Pack
skip: Customization
skip: Eeprom/ffs
firmware patch (sp-lock #1)...
not required
firmware patch (sp-lock #2)...
not required
nfi area detection...
bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E521_MP_F1_IN_ MMX_05_08.bin
nfi area detection (3 cores) finished: Ok
"format ffs" active
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
ram test...
testing...
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E521_MP_F1_IN_MMX_05.08
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E521_MP_F1_IN_ MMX_05_08.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: unexpected answer:
startup code area #1 is valid
startup code area #1 detection done
rom info ver: 07
sw version: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E521_MP_F1_IN_M MX_05_08.BIN
project-id: E521_MP_F1_IN_MMX_05.08, 0556E59E
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is absent
===> done
====================
New firmware found (v.3.62, database date: 13.01.2011):
TINNO35_09A_PCB01_GPRS_MT6235B_S01.E521_MP_F1_IN_M MX_05_08.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support:
[email protected] or upload files to
RapidShare AG, Cham, Switzerland or
4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
nfi area detection...
bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E521_MP_F1_IN_ MMX_05_08.bin
nfi area detection (3 cores) finished: Ok
startup code area #1 check...
rpl file not found: C:\Program Files\InfinityBox\MModule\id.00006235.[TINNO35_09A_PCB01_GPRS_MT6235B_S01.E521_MP_F1_IN_M MX_05_08.BIN_9EE55605].rpl
rpl file not found: C:\Program Files\InfinityBox\MModule\id.00006235._TINNO35_09A _PCB01_GPRS_MT6235B_S01.E521_MP_F1_IN_MMX_05_08.BI N_9EE55605_.rpl
rpl file not found: C:\Program Files\InfinityBox\MModule\backup_security\id.00006 235.[TINNO35_09A_PCB01_GPRS_MT6235B_S01.E521_MP_F1_IN_M MX_05_08.BIN_9EE55605].rpl
rpl file not found: C:\Program Files\InfinityBox\MModule\backup_security\id.00006 235._TINNO35_09A_PCB01_GPRS_MT6235B_S01.E521_MP_F1 _IN_MMX_05_08.BIN_9EE55605_.rpl
====================
warning: unknown firmware: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E521_MP_F1_IN_M MX_05_08.BIN_9EE55605
Unknown firmware found (v.3.62, database date: 13.01.2011), user action required:
1. download latest software from support area and try again
2. if no still luck follow the next procedure:
- find good working phone with the same firmware:
TINNO35_09A_PCB01_GPRS_MT6235B_S01.E521_MP_F1_IN_M MX_05_08.BIN
- make "Read full flash" operation
- send flash backup files to support:
[email protected] or upload files to
RapidShare AG, Cham, Switzerland or
4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
- be little bit patient and wait update
====================
error: startup code area #1 can't be fixed
You can flash phone now but can not finalize it,
in most cases phone CAN NOT power-on.
Do you want to continue anyway ?
number of cores: 3
loading files...
number of areas: 3
done
write...
write bootloader...
.
.
.
.
.
.
.
.
.
.
.
write core...
Format (HW_STORAGE_NAND)...
Disconnect...
done
file saved: C:\Program Files\InfinityBox\MModule\backup_security\Micromax-Q5_TINNO35_09A_PCB01_GPRS_MT6235B_S01.E521_MP_F1_I N_MMX_05_08__system_log_20110405-163922.B4X.bin
Finished, time used: 43 min 28 sec
Remove/Install battery now !
Pls Help