COM3 [VCP0] selected
module v3.82
Action: read unlock codes
unlock method: read codes
Model: Huawei-G7007
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8A04:8A01]...
CPU: MT6235
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235,E04
Date: 2000.00.00
Version: 1.0
Version: ENGC46B182
Version: VER.B
80 byte(s) read
imei: 357221xxxxxxxx
connection Ok
185 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
173 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + default
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
it looks like code was read not good,
if code is not accepted by phone:
- insert wrong sim card into phone
- power-On phone
- enter code: 12345678
- wait 10 seconds
- power-Off phone via "Power" button (do not remove battery)
- read unlock codes again
Finished, time used: 14 sec
Remove/Install battery now !
this code 12345678 not accepted !!! Try many many times insert wrong sim,power off,power on but not success !!!
Infinity team kill one HUAWEI G7007 (Software error: 23 and can't repair) and now this phone not unlocked success!!! Why tthis phone is in program when not supported yet successful ?!?!?!?!?
PLEASE GIVE THE WAY TO UNLOCKED THIS PHONE !!!