View Single Post
Old 05-15-2004, 08:43   #4 (permalink)
raffazila
No Life Poster
 
raffazila's Avatar
 
Join Date: May 2004
Age: 38
Posts: 632
Member: 64957
Status: Offline
Thanks Meter: 79
first u need to check the version of the phone.if it is >b12 u need to flash with <b13.
For flashing the the fone and unlocking u need 3 softwares.
1.G90 Flash request by Virtual
2.G90 Dowloader by H. Ishida [or] use uspu 4
3.uspu 4 [or] G90 Unlocker by Virtual

Procedure
1.first u need to put the phone in service mode with G90 Flash request by Virtual by this way.
Connect the phone without battery.
Run initflgd90.exe -> press Request flash.
Put battery... -> the phone led should be green.
do not remove cable or battery cos u ill lose service mode this phone can flash only in service mode.

2.flash it with b12 or lesser version file with uspu4 [or] G90 Dowloader by H. Ishida

3.unlock with [or] G90 Unlocker by Virtual.
(for best result instead of pressing power button put the cable in when it ask power on)
congrates fone unlocked.
best regards.

Important notice
1 read all instruction carefully
2.be carefull this solution is only for version >b12.
3 battery must be full.
4 put back u r feed back clearly.so that the next member with this probs could easily sort out this problem.

Last edited by raffazila; 05-15-2004 at 09:06.
  Reply With Quote
 
Page generated in 0.11540 seconds with 6 queries