Fone was on blinking before
and now working perfect
GFive Model D68
Code:
COM11 [VCP0] selected
module v3.29
Device: Autodetect 6253 NOR
Checking data, wait...
Action: reset settings ("format ffs") NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6253:8A02:8A00
status: FF
bbchip bl ver: FE
NOR flash id[00C0]: 0098:009E00000000 [TOSHIBA] TC58FYM7T8C
chip size: 16Mb
otp status/size: S_DA_NOR_OTP_EXIST/00020000
NAND flash chip: not installed
internal RAM size: 00020000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 00000000/00000000
detect sec ro...
detect custom parameters...
detect project-id...
project-id: L50MM12.9.52.1.3T04M1206_M700
detect NOR info...
number of areas/bytes to read: 1:00040000
reading (HW_STORAGE_NOR)...
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: JWT_Z137B_304_PCB01_GPRS_MT6253_S00.L50MM12_9_52_1_3T04M1206_M700.BIN
project-id: L50MM12.9.52.1.3T04M1206_M700, 00000000
code offset: 00000000
ffs offset/size [02]: 00E00000/00200000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
====================
New firmware found (v.3.29, database date: 07.03.2011):
JWT_Z137B_304_PCB01_GPRS_MT6253_S00.L50MM12_9_52_1_3T04M1206_M700.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 16Mb
number of areas/bytes to read: 1:01000000
reading (HW_STORAGE_NOR)...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\JWT_Z137B_304_PCB01_GPRS_MT6253_S00.L50MM12_9_52_1_3T04M1206_M700__fullflash_20110415-204544.B0M.bin
Format...
Disconnect...
done
Finished, time used: 8 min 52 sec
Remove/Install battery now !
B.r.,
Sonu