GSM-Forum - View Single Post

systeam1 · 04-20-2011, 16:22

Hi,
I tried to read the firmware from v909 phone, and I got error:
"
COM32 [VCP0] selected
module v3.29
Device: Autodetect 6228-6268 NAND
Checking data, wait...
Action: read firmware NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 0.0/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash id[0000]: 0000:000000000000 [AMD] AM29DL323D
chip size: 0Mb
otp status/size: S_DONE/00000000
NAND flash id[0000]: 0000:000000000000 [SAMSUNG] K9F5608Q0C
chip size: 0Mb
page/spare size: 0000/0000
pages per block: 0000
bits i/o: 00
address cycles: 00
internal RAM size: 00000000
external RAM [HW_RAM_UNKNOWN, CS0] size: 00000000
error: can not boot device: 07D4:S_BROM_DOWNLOAD_DA_FAIL
error: last error: 07D4:S_BROM_DOWNLOAD_DA_FAIL
Disconnect...
done
Finished, time used: 26 sec
Remove/Install battery now !"

04-20-2011, 16:22	#1 (permalink)
systeam1 Freak Poster Join Date: Aug 2009 Posts: 109 Member: 1108022 Status: Offline Thanks Meter: 32	v909 china firmware not reading Hi, I tried to read the firmware from v909 phone, and I got error: " COM32 [VCP0] selected module v3.29 Device: Autodetect 6228-6268 NAND Checking data, wait... Action: read firmware NAND interface: BROM_DLL_v3.1016.00 Connect... Phone should be Switched OFF ! Press and HOLD Power button now ! Connecting... Booting... Release Power button now ! bootcode current/expected: 0.0/3.2 CPU: 6235:8A04:8A01 status: FF bbchip bl ver: FE NOR flash id[0000]: 0000:000000000000 [AMD] AM29DL323D chip size: 0Mb otp status/size: S_DONE/00000000 NAND flash id[0000]: 0000:000000000000 [SAMSUNG] K9F5608Q0C chip size: 0Mb page/spare size: 0000/0000 pages per block: 0000 bits i/o: 00 address cycles: 00 internal RAM size: 00000000 external RAM [HW_RAM_UNKNOWN, CS0] size: 00000000 error: can not boot device: 07D4:S_BROM_DOWNLOAD_DA_FAIL error: last error: 07D4:S_BROM_DOWNLOAD_DA_FAIL Disconnect... done Finished, time used: 26 sec Remove/Install battery now !"