Quote:
Originally Posted by nidirex Middle pins are connected in two different points of logic board, it's very hard to wiring these.. |
Really the 2 center points it's very hard to found spend an hour for me to found and its very importand .Make the jumper from connector to these points not from test points to FL5 and FL7 and becarefull the point of ground at 2 capacitors close to them.At photo to ignore better the point i have marked at the other (not the correct) side of FL5-FL7 but doesn't matter if you connect there only by bypass these 2 parts but if you can cut the metal and sold at correct points.
Best Regards
GabiRo
P.S. if you have missing the Negative Temp Control signal (Green mark point) the phone restarts after 3-5 min and don't charge correctly but very very slowly (2hours for 10%)