Quote:
Originally Posted by Mcnbox Regard mobile TX (usual which is High potential), Can using multimeter to the metric data out , once the phone power on , you can get the voltage around 2.6v from phone USB, But sometimes you may get 2 or 3 potential, so if USB have so many pins this will be take much time to fiinish the job . so the easy way which contact your supplier give you the flash cable schematic :-)
Best regards !
Mcnbox |
The connector on the phone is a micro usb type b female connector. Wouldn't the TX and RX just be the standard for a USB connector of this type. On a standard micro usb type b connector pin 2 is D- and pin 3 is D+. Pin 1 is +5v and pin 4 is ground and pin 5 is not used. Would RX be d- and TX be D+ or is it the other way around?