GSM-Forum - View Single Post - How to unlock M55 without restpoint and How to repair dead phones.

halcon.cpu · 06-03-2004, 13:01

Here is how to repair and unlock your M55.

1. Download dataexchangesoftware_v267.exe
2. Download px5amd
3. execute mobile from your desktop (step 1), conect cable to phone, upload px5amd.jad and px5amd.jar extracted from step 2 to Java/jam folder of your phone.
4. (phone) go to Menu -> card-explorer -> Java -> jam -> px5amd and execute px5amd (the file without down arrow

)
5. type 39116 when ask you for a code. Press 2 (path bootcore).
The phone will turn off.
6. Download Freia_M55_AMD and execute it.

My settings in Configuration are:
Com port for cable: COM1
speed comunication: 115200
Boot type: test point (x5x)
Com port setup: RTS and DTR enable.
Process information: Low

Press UNLOCKING button.
When program ask for, press power button of your phone.
If everything was ok your M55 phone is free.

----------------------------------------------------------
Guide for troubleshooting:

A. If your phone doesnt boot.
B. If your phone doesnt boot but appear a blue screen while a few seconds with a buzz and then it turn off.

PART A:
1. Download a Full flash of 14Mb (M55_v.11_lg92_freia.zip from unlockeasy.com --- http://www.unlockeasy.com/modules.ph...ownload&cid=50)
2. Download freia 10 biuld 9 (I have test it maybe other version work too)
3. Execute freia, ATTENTION select "Siemens M55" NOT "siemens M55 BOOT" . Go to -> Configuration functions:

My settings are:
Com port for cable: COM1
speed comunication: 115200
Com port for dongle: COM1
Boot type: test point (x5x)
Com port setup: RTS and DTR enable.
Process information: Medium
Boot Type: Patched bootcore.
Then press OK button

3.1 Press "Write flash to phone" button.
3.2 Now you have to Search and select SIEMENS M55 LG92 V11 - 00200000.FLS (14Mb)
3.3 Select "firmware" in Presets option.
3.4 Press red power button when the program ask for it.
This process will be slow, maybe 45 min or more.
3.5 Remove battery phone and put it again.
In this point when you try to power on the phone, will appear a blue screen with a buzz while a few seconds a then it will turn off.

PART B:
3.6 Remeber Select "Siemens M55" NOT "Siemens M55 BOOT" and the same configuration (boot type, speed, etc)
3.6.1 Press "Unlocking functions" and select "Direct unlock no map is saved" and "USE ORIGINAL IMEI"...
3.6.2 Press red power button when the program ask for it.

And after it... and if G O D was good with you, your phone will be repaired and unlocked.

This is my gift to GSM FORUM COMUNITY for help me too many times...

I hope to have been usefull. AND DONT GET DESPERATE, LIFE GOES ON...

06-03-2004, 13:01	#1 (permalink)
halcon.cpu Junior Member Join Date: May 2004 Age: 47 Posts: 8 Member: 67447 Status: Offline Thanks Meter: 0	How to unlock M55 without restpoint and How to repair dead phones. Here is how to repair and unlock your M55. 1. Download dataexchangesoftware_v267.exe 2. Download px5amd 3. execute mobile from your desktop (step 1), conect cable to phone, upload px5amd.jad and px5amd.jar extracted from step 2 to Java/jam folder of your phone. 4. (phone) go to Menu -> card-explorer -> Java -> jam -> px5amd and execute px5amd (the file without down arrow ) 5. type 39116 when ask you for a code. Press 2 (path bootcore). The phone will turn off. 6. Download Freia_M55_AMD and execute it. My settings in Configuration are: Com port for cable: COM1 speed comunication: 115200 Boot type: test point (x5x) Com port setup: RTS and DTR enable. Process information: Low Press UNLOCKING button. When program ask for, press power button of your phone. If everything was ok your M55 phone is free. ---------------------------------------------------------- Guide for troubleshooting: A. If your phone doesnt boot. B. If your phone doesnt boot but appear a blue screen while a few seconds with a buzz and then it turn off. PART A: 1. Download a Full flash of 14Mb (M55_v.11_lg92_freia.zip from unlockeasy.com --- http://www.unlockeasy.com/modules.ph...ownload&cid=50) 2. Download freia 10 biuld 9 (I have test it maybe other version work too) 3. Execute freia, ATTENTION select "Siemens M55" NOT "siemens M55 BOOT" . Go to -> Configuration functions: My settings are: Com port for cable: COM1 speed comunication: 115200 Com port for dongle: COM1 Boot type: test point (x5x) Com port setup: RTS and DTR enable. Process information: Medium Boot Type: Patched bootcore. Then press OK button 3.1 Press "Write flash to phone" button. 3.2 Now you have to Search and select SIEMENS M55 LG92 V11 - 00200000.FLS (14Mb) 3.3 Select "firmware" in Presets option. 3.4 Press red power button when the program ask for it. This process will be slow, maybe 45 min or more. 3.5 Remove battery phone and put it again. In this point when you try to power on the phone, will appear a blue screen with a buzz while a few seconds a then it will turn off. PART B: 3.6 Remeber Select "Siemens M55" NOT "Siemens M55 BOOT" and the same configuration (boot type, speed, etc) 3.6.1 Press "Unlocking functions" and select "Direct unlock no map is saved" and "USE ORIGINAL IMEI"... 3.6.2 Press red power button when the program ask for it. And after it... and if G O D was good with you, your phone will be repaired and unlocked. This is my gift to GSM FORUM COMUNITY for help me too many times... I hope to have been usefull. AND DONT GET DESPERATE, LIFE GOES ON...