| successfuly read and formating spd
Welcome to use McnBox!
Selected COM21
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN***********
Firmware V1.10
Checksum ****-****
Box Connected!
Ready working at COM21
Scanning pin status,please waiting...
->........................
11,12 Short-pin
Pin-status Scan Done
Scanning,waiting...
->=.
Operation done, Pin detect out.
USB D-: 10 USB D+: 9 Spread
Total expend 4 seconds...
->#..
...
->#.............
Operation done, Pin detect out.
BOOT: 7 set as oInvert
USB D-: 10 USB D+: 9 GND:1 2
Press [ Save ] to save Pinout
[G:1 2 7 D-:10 D+:9] Apply to Box
If Scan other phone, please click [Stop]
[G:1 2 7 D-:10 D+:9] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 007F227E(22102201)
Flash Model 128BO-70CWP
Flash Size 0x800000(8.0M)Start Reading...
Read Done!File saved: D:\CHINA FLASH FILE COLLECT\China Flash Files.MCN\nokia_l7000\6600L_WT6228_128BO-70CWP.bin
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
User Abort
[G:1 2 7 D-:10 D+:9] Apply to Box
Checking SCI USB2Serial port, wait...
SCI USB2Serial Port: COM24
Connecting, wait...
Phone Connected!
Info: Spreadtrum Boot Block version 2.0
Initialize boot...
CPU Info 6600L/WT6228
Flash Type NOR
Flash ID 007F227E(22102201)
Flash Model 128BO-70CWP
Flash Size 0x800000(8.0M)
Start Formatting,Wait...
Format Done. |