== Maximas M20 user code reset done ==
first trying read but failed
Code:
COM32 [VCP1] selected
module v3.29
Action: read unlock codes
unlock method: read codes
Model: Autodetect 6205-6239 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:7C71:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: L70D_78C0_V8_0_7
Version: L80_HW
====================
New firmware found (v.3.29, database date: 04.04.2011):
L70D_78C0_V8_0_7
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
detecting structure #2...
1 2 3 5 7 8 9 11 13 done
80 byte(s) read
imei: 35284404232387
connection Ok
detecting structure #1...
0 1 2 3 4 7 8 9 12 13 14 15 16 17 19 20 21 22 23 24 27 28 29 32 33 34 35 36 37 39error: detection failed (30 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 16 sec
Remove/Install battery now !
then success with standard fast
Code:
COM32 [VCP1] selected
module v3.29
Device: Autodetect 6205-6239 NOR
Checking data, wait...
advanced flash detection enabled
Action: "user code"
unlock method: standard fast
Unlock procedure can be faster if you skip ffs/eeprom area backup procedure.
Do you want to disable ffs/eeprom backup ?
ffs/eeprom backup enabled
ffs/eeprom backup enabled, it may takes several minutes !
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:7C71:000C
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
detecting chip #01 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
detecting chip #02 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
detecting chip #03 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
detecting chip #04 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
detecting chip #05 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
detecting chip #06 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
detecting chip #07 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
number of flash chip/regions detected: 08/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
device parameters detection in progress...
detecting chip #00 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
detecting chip #01 in region #00...
flash: EC257E25062501:2AEA0000000000
flash: AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
otp offset: 00000000
it's time to stop: 2A0000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 00800000
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (05)
TCL-ID is absent
====================
New firmware found (v.3.29, database date: 04.04.2011):
L70D_QX_MJL_PCB01_GPRS_MT6223P_S00.L70D_78C0_V8_0_7.BIN
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
rom info detection finished
rom info ver: 05
sw version: L70D_QX_MJL_PCB01_GPRS_MT6223P_S00.L70D_78C0_V8_0_7.BIN
project-id: L70D_78C0_V8_0_7, 00000000
code offset: 00000000
ffs offset/size [01]: 00700000/00100000
rom info structure: [standard] type (05)
TCL-ID is absent
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset detected: 00700000
standard ffs/eeprom offset confirmed: 00700000
detecting ffs/eeprom size...
ffs/eeprom size: 00100000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00700000-007FFFFF
firmware area: 00000000-006FFFFF
detecting startup code area #2...
................................................................................................................................................................................................................................................................
startup code area #2 is absent
detecting ffs/eeprom structure pass 1...
..................
ffs/eeprom: detect std location pass #1...
............................
ffs/eeprom: detect ext location pass #1...
........................
ffs/eeprom: detect standard offset pass #1...
ffs/eeprom record offset detected
ffs/eeprom: detect standard data...
ffs/eeprom record size detected
ffs/eeprom layout detection complete
ffs/eeprom detected ok: element #1
sec info (detailed) detection...
searching sec info#1...
.
search sec info#1 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
reading: L70D_QX_MJL_PCB01_GPRS_MT6223P_S00.L70D_78C0_V8_0_7__ffs...
file saved: C:\Users\AlaM\Desktop\L70D_QX_MJL_PCB01_GPRS_MT6223P_S00.L70D_78C0_V8_0_7__ffs_20110417-163842.B0E.bin
flash: EC257E25062501:2AEA0000000000
Backup required data Done
====> Patch required data ...
........................
lock area found
Patch required data Done
====> Special operation ...
Special operation Done
====> Write ...
flash: EC257E25062501:2AEA0000000000
flash: EC257E25062501:2AEA0000000000
Write: lock-area-1
Write Done
====> Finalization ...
Finalization Done
Finished, time used: 3 min 20 sec
Remove/Install battery now !