COM8 [Serial2] selected
module v3.91
Action: read unlock codes
unlock method: read codes
Model: Huawei-G6620
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6253:8A02:8A00]...
CPU: MT6253
chip: 0000:0000:000F
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6253,E02
Date: 2000.00.00
Version: 1.0
Version: G6620SS.C210.M40.05.01
Version: CKT53_12832_09B_HW
====================
New firmware found (v.3.91, database date: 16.05.2011):
G6620SS.C210.M40.05.01
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support:
[email protected] or upload files to
RapidShare AG, Cham, Switzerland or
4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
116 byte(s) read
imei: 35194804715599
connection Ok
217 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
205 byte(s) read
reading data...
220 byte(s) read
lock[1] code: + 38489533
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if phone do not ask for a code try: *983*8284#
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone (do not remove battery)
- read unlock codes
- restore original imei
Finished, time used: 13 sec
Remove/Install battery now !