View Single Post
Old 07-12-2011, 23:04   #10 (permalink)
sugahpop
Junior Member
 
Join Date: Jul 2011
Posts: 3
Member: 1614586
Status: Offline
Thanks Meter: 0
Quote:
Originally Posted by pinop View Post
1- clean i/o connector flex and pcb connector
2- replace i/o connector flex and pcb connector
3- replace 1 or 2 transistor under shield (check oxy), if no transistor available make jumper.
phone charge @ 290mA , stop charge after 5h, dont get hot and stby time is right.
probably transistor cut power when too hot or someting like.
if solved press thank!!
Oké, this is not exactly clear for me,
in my case there are transistors in the place of the green line's, do i have to break them away?
And do you mean by replacing the PCB connector, the connector placed on the mainboard or the connector on the ribbon.

Quote:
Originally Posted by TOZE
just rehot all component near dock connector works 100% FOR OUR SHOPS
DONE BY GSM CLINIQUE
Do you mean the components on the mainboard, because there aren't any components visible on the dock connector module
  Reply With Quote
 
Page generated in 0.06856 seconds with 7 queries