View Single Post
Old 07-25-2011, 09:20   #10 (permalink)
:::..CyBoRg..:::
No Life Poster
 
:::..CyBoRg..:::'s Avatar
 
Join Date: Aug 2007
Location: inside the pcb board
Posts: 544
Member: 568876
Status: Offline
Thanks Meter: 99
doro phoneeasy 409s gsm unlocked done via read codes........


COM7 [VCP0] selected
module v3.75
Action: read unlock codes
unlock method: read codes
Model: Doro-PhoneEasy-410s
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A08]...
CPU: MT6223
chip: 0011:5FED:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E08
Date: 2000.00.00
Version: 1.0
Version: SHELL-S21_1V8_DORO409S_L15EN_201_110107_MCP128+32_SMS
Version: CKT23D_08A_HW
80 byte(s) read
imei: 35682404008323
connection Ok
191 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1234
179 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + 12345678
lock[2] code: + 56781234
lock[3] code: + 84064789
lock[4] code: - 3344
lock[5] code: - 5566
lock[6] code: + 7788
lock[7] code: + 9900
if code is not accepted by phone:
- make full flash backup for emergency case
- flash phone with good eeprom file
- Power-On phone without sim-card
- Power-Off phone
- read unlock codes
- restore original imei
Finished, time used: 1 min 17 sec
Remove/Install battery now !
  Reply With Quote
The Following User Says Thank You to :::..CyBoRg..::: For This Useful Post:
 
Page generated in 0.06598 seconds with 7 queries