Quote:
Originally Posted by audiozone  I used in my interface 2.2k ohms resistors and works fine, maybe the diference is the vcc used, you are using 9 volts and I'm using 12volts. The affected pin is the 19 ( IRQ, ) this pin is connected to the (-- In --) in the programmer interface, this wire goes to 12 volts thru a 2.2k ohms resistor in my programmer interface. I already tested with motocracker 4.3, 6.2 and 7.0. |
I'll try with 12v and let you know... thanks 1000 times
