GSM-Forum - View Single Post - gt-c3500 again

shomyx · 09-05-2011, 13:15

1. cable c3300 530 kohm with clamps, set baud rate 460800
2.erase full (in erase NOR instead size 01E0 0000 put 0200 0000) will erase E2P too....With HWK!!!!!!!!
3. format NAND
4. write E2P
5. write FULL MCU
Thank cellcarcol for E2P and FULL MCU!!!!!!!!!!!!

6.format NAND again
7.open Flash loader 7.4.7_SSG_v0.0_Lite(mdl_updated) ver 2
8. DON'T SET MODEL!!!!!!!!!!!!!!
9.in app bin file thick and put ptt, tfs, csc (C3500XXKB2_OXAKB1) and START flash loader
10. hold vol+ and lock put USB cable and wait.....
11. will start some flash and stop with some errors after maybe 3min--OK don't panic!!!
12.pullout USB cable STOP flash loader, close Flash loader
13. again with HWK and C3300 cable do format NAND
14. open Flash loader again
15. NOW YOU CAN SET MODEL C3500_VELVET_Setting_v03.mdl!!!!!!!
16. again thick ptt, tfs, csc files and START
17.vol+ and lock put USB and wait
18. when finished Flashing will blink again NOW with HWK format NAND!!!!!! phone will work again and you must do is repair IMEI and THIS IS IT FOLKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

100000000000000%WORK

good luck!!!!!!!!!!

09-05-2011, 13:15	#6 (permalink)
shomyx Freak Poster Join Date: Jun 2009 Posts: 232 Member: 1062029 Status: Offline Thanks: 40 Thanked 40 Times in 22 Posts	gt-c3500 fixed -solution is here 1. cable c3300 530 kohm with clamps, set baud rate 460800 2.erase full (in erase NOR instead size 01E0 0000 put 0200 0000) will erase E2P too....With HWK!!!!!!!! 3. format NAND 4. write E2P 5. write FULL MCU Thank cellcarcol for E2P and FULL MCU!!!!!!!!!!!! 6.format NAND again 7.open Flash loader 7.4.7_SSG_v0.0_Lite(mdl_updated) ver 2 8. DON'T SET MODEL!!!!!!!!!!!!!! 9.in app bin file thick and put ptt, tfs, csc (C3500XXKB2_OXAKB1) and START flash loader 10. hold vol+ and lock put USB cable and wait..... 11. will start some flash and stop with some errors after maybe 3min--OK don't panic!!! 12.pullout USB cable STOP flash loader, close Flash loader 13. again with HWK and C3300 cable do format NAND 14. open Flash loader again 15. NOW YOU CAN SET MODEL C3500_VELVET_Setting_v03.mdl!!!!!!! 16. again thick ptt, tfs, csc files and START 17.vol+ and lock put USB and wait 18. when finished Flashing will blink again NOW with HWK format NAND!!!!!! phone will work again and you must do is repair IMEI and THIS IS IT FOLKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 100000000000000%WORK good luck!!!!!!!!!!