[Faisal_Computer]

POSSIBLE PROBLEMS

DB200X+NEXPERIA

damaged SCRC (imei mismatch), damaged seczone, damaged gdfs,damaged CCPU EROM

1. go to emptyboard tab
2. select model
3. on settings, check "signed mode", fill login details
4. press reset, connect phone
5. if gdfs structure okay, skip that step, otherwise add to firmware are gdfs in ssw format: one of

DB2001_G700_GDFS_IN_SSW_FORMAT.SSW
DB2001_M600_GDFS_IN_SSW_FORMAT.ssw
DB2001_P1_GDFS_IN_SSW_FORMAT.ssw
DB2001_P990_GDFS_IN_SSW_FORMAT.ssw

6. add to firmware area correct EROM

for m600,w950,p990: pda_ccpu_convert_red49_BROWN_CID49_DB2001.software
for w960,p1: pda_ccpu_convert_red53_BROWN_CID49_DB2001.software

7. press flash
8. reflash phone on usual PDA tab if needed.

phone could not boot using dcu60, erom version timeout error,etc

ACPU EROM damaged, to restore it

1. select correct PDA model
2. find corresponding EROM in dist\eroms\, add it to firmware area
3. select correct com port. ufs,usb can't be used for that operation.
4. press recovery
5. connect turned off phone
6. reflash phone via USB with normal firmware

S1 OPEN

phone could not boot and blinks red, you CAN flash phone

unlock phone using full signature unlock

phone stuck on white screen

reflash clean file system files, then flash normal firmware

phone could not boot and blinks red, you CAN NOT flash phone

if phone aid 004 - that is brick, can't be repaired by known 3rd party tools
if phone aid 001,002,003 - you need to perform trim area repair process:

first, make flash readout with options: signed mode,use alternative security bypass.
start 80021000
len 00200000
MID 01
"read spare" UNCHECKED
"read as ssw" UNCHECKED

you will get trim area image readout.

now lets determine if hwconfig present and not mismatched.
get and hex editor (hiew, winhex or simular)

using editor search function, locate in readout bytes d3 07 00 00
now check attached picture.

if imei is your, then you can try to fix phone.
if imei is not your and you do not have backup - send phone to semc.

now, lets extract needed trim area units and build script.

1.
you need to copy binary data from "data start" till "data end" (inclusive)
then convert binary data to its ASCII values (with same winhex)


add script command to data

example, from example file read_80021000_00200000_35681003102941.bin:
read_80021000_00200000_35681003102941.zip

tawrite: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

2. using editor search function, locate in readout bytes da 07 00 00.
extract binary data ( method very same as shown on picture ), add script command

tawrite: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

3. using editor search function, locate in readout bytes 51 08 00 00.
extract binary data ( method very same as shown on picture ), add script command

tawrite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

4. you have now 3 big string.
copy them into one file (each string should be on one line !)
add 4-th script command in the end of file

tawrite:0002FDE800

you have own fixup file.
fixup_35681003102941.txt

proceed to U1i SATIO DEAD - Page 11

notice, that is you will get simlock tampered message after fix procedure, you NEED to unlock phone using signature server.

tutorial video by Aishur:4shared.com - free file sharing and storage

S1 ANDROID

q:
i had unlocked my phone using alternative security bypass method, but phone not unlocked.

a:
you did not set all required settings.
you must check "signed mode", "alternative security bypass mode", "do full unlock instead of usercode reset"


q:
i had unlocked my phone using alternative security bypass method, my settings are correct, i lost 4 credits,
but phone not unlocked.

a:
just reflash phone with required firmware ( android 2.1 ) and repeat procedure.
no further credits will be required.