GSM-Forum - View Single Post - My ATF is not detecting Please Help!

Advance-Box · 09-15-2011, 08:27

*** Make sure only ATF Box is connected on the USB Port
*** Other GSM Boxes Connected on the USB port will be damaged
*** Dsiconnect Other GSM Boxes such as UFS etc... first...

1. Run MPROG 3.5

C:\AdvanceBox Turbo Flasher\Driver\MProg 3.5 Release\Mprog.exe

2. Click File --> Open

Select File "new abox turboflasher.ept"

C:\AdvanceBox Turbo Flasher\Driver\new abox turboflasher.ept

3. Click Device --> Erase

4. Click Device --> Program

5. Disconnect ATF Box From USB Port, wait 5 seconds, then reconnect
ATF Box to USB Port...

6. Install ATF Drivers from

C:\AdvanceBox Turbo Flasher\Driver\ATF_NEW_DRIVERS\

09-15-2011, 08:27	#6 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	* Make sure only ATF Box is connected on the USB Port * Other GSM Boxes Connected on the USB port will be damaged *** Dsiconnect Other GSM Boxes such as UFS etc... first... 1. Run MPROG 3.5 C:\AdvanceBox Turbo Flasher\Driver\MProg 3.5 Release\Mprog.exe 2. Click File --> Open Select File "new abox turboflasher.ept" C:\AdvanceBox Turbo Flasher\Driver\new abox turboflasher.ept 3. Click Device --> Erase 4. Click Device --> Program 5. Disconnect ATF Box From USB Port, wait 5 seconds, then reconnect ATF Box to USB Port... 6. Install ATF Drivers from C:\AdvanceBox Turbo Flasher\Driver\ATF_NEW_DRIVERS\ Last edited by Advance-Box; 09-15-2011 at 08:33.