View Single Post
Old 11-11-2011, 08:00   #1 (permalink)
royal_electronics
No Life Poster
 
royal_electronics's Avatar
 
Join Date: Nov 2006
Location: india
Age: 43
Posts: 1,222
Member: 397892
Status: Offline
Sonork: 100.1609899
Thanks Meter: 190
Arrow micromax q5 no power

helloo, i have micromax q5 & i try to format with 6205-6239 nor but not sucsess .

error : >

Uploaded with ImageShack.us


if i format with 6228-6253 nand than show this .

logs : >
Code:
COM15 [VCP0] selected
module  v3.26
Device: Autodetect 6228-6253 NAND
Checking data, wait...
Action: reset settings ("format ffs") NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0017]: 00AD:007600AD0076 [HYNIX] HY27XS08121M
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: S_DA_RAM_ERROR
done
Set baudrate (115200)...
done
ram test...
testing...
ram test passed
===>  detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/02000000
firmware size: 32Mb
ffs size: 32Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: E521_MP_F1_IN_MMX_05.12
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: TINNO35_09A_BOOTLOADER_V005_MT6235B_E521_MP_F1_IN_MMX_05_12.bin
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
number of areas/bytes to read: 1:00004000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
error: unexpected answer:
startup code area #1 is valid
startup code area #1 detection done
rom info ver: 07
sw version: TINNO35_09A_PCB01_GPRS_MT6235B_S01.E521_MP_F1_IN_MMX_05_12.BIN
project-id: E521_MP_F1_IN_MMX_05.12, A3AA2E52
code offset: 00000000
ffs offset/size [01]: 02000000/02000000
rom info structure: [protected] type (07), 1 record(s)
TCL-ID is absent
===>  done
warning: can not format: HW_STORAGE_NOR is not present
Format...
Disconnect...
done
file saved: C:\Program Files\ChineseMiracle\backup_security\TINNO35_09A_PCB01_GPRS_MT6235B_S01.E521_MP_F1_IN_MMX_05_12__system_log_20111111-122507.B4X.bin
Finished, time used: 1 min 0 sec
Remove/Install battery now !
  Reply With Quote
 
Page generated in 0.08374 seconds with 7 queries