=== [11/11/2011 1:12:52 PM] ====
COM3 [VCP0] selected
module v4.07
Action: touchscreen calibration
How to calibrate touchscreen:
- for this operation you need to have full flash backup from phone
- if you have full flash backup already press "Yes", select full flash file and follow instructions given by software
- if you do not have full flash backup yet press "No", read full flash and repeat calibration procedure
Do you have full flash backup ?
Loading file v.02...
FREEFLY35_09A_PCB01_GPRS_MT6235B_S01.H618_M35_BF_V 05__firmware_20111111-130931.B4M.bin loaded
nfi area detection...
bootloader version: FREEFLY35_09A_BOOTLOADER_V005_MT6235B_H618_M35_BF_ V05.bin
nfi area detection (3 cores) finished: Ok
ffs/eeprom record offset detected
ffs/eeprom record size detected
nfi area detection...
bootloader version: FREEFLY35_09A_BOOTLOADER_V005_MT6235B_H618_M35_BF_ V05.bin
nfi area detection (3 cores) finished: Ok
ffs/eeprom record offset detected
ffs/eeprom record size detected
Model: _Autodetect MT6228-6268 NAND
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8B00:8A01]...
CPU: MT6235
high speed boot On
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235B,E00
Date: 2000.00.00
Version: 1.0
Version: H618_M35_BF_V05
Version: FREEFLY35_09A_HW
====================
New firmware found (v.4.07, database date: 09.11.2011):
H618_M35_BF_V05
This firmware is missing in support area. If this phone is good and working:
- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support:
mtk@infinity-box.com or upload files to
RapidShare ? Secure Data Logistics or
4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
90 byte(s) read
imei: 35868800000015
connection Ok
512 byte(s) read
89 byte(s) read
reading data #2...
512 byte(s) read
calibration value: 0
writing data...
verification...
verification Ok
Finished, time used: 19 sec
Remove/Install battery now !