i m facing great problem last few days sam 520 i have completely flash and also repaired msl but still the set in same condition hangs after start up here is the logs
Software: B520DDHK1
Regions : India
Language: en(bn,gu,hi,kn,mr,ms,pa,ta,te)
Release : 2008 November Rev: 1
Hardware: MP 0.700
IMEI: 357669-02-079531-7
User Lock : 1234
MSL : Active
S/N : RW4S297329
MSL : Deactivated
Lock Level: 00h [Not Locked]
SPCode[20]: ffh ffh ffh ffh ffh ffh ffh ffh ffh ffh ffh ffh ffh ffh ffh ffh ffh ffh ffh ffh
NB_CUR_LOCK:00h
NB_CUR_SPCODE:00h
PCK : 00000000 [#0141*00000000#]
NCK : 00000000 [#0111*00000000#]
SCK : 00000000 [#0121*00000000#]
SPCK: 00000000 [#0133*00000000#]
MCK : 61200522 [#0199*61200522#]
Using MSL S/N: RW4S297329
1st Boot Ok, McuId: 00030021, Rom: 00030021, 13-1.2 (Vision X122A)
2nd Boot Ok, McuId: 00030021, Rom: 00030021, 7-2.0
Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_v24_s05_2.sre
Flash1: Fl_Id: 00010000_227E3D00 - Spansion SxxWS512P
Baud Rate Set: 460800 bps
Image File: B520__FULL.s3t
Flashing NOR part...
Write Done, 67108880 byte(s), Time: 33:39
Read Done, St: 0x23FE0000, 131072 byte(s), Time: 00:03, 0
Flashing NOR part...
Write Done, 131088 byte(s), Time: 00:04
MSL Repair Done
pls guide the exact prcedure for the whole problems
best regards - jacky
