[xesar]

i have a i9020 dead by flash, I try repair boot like i9023, but appears this error, maybe somebody with experience will help me...


[16/11/2011 16:22:59] [START OPERATION_ID = DCC_ERASE_MEMORY]
[16/11/2011 16:23:01] Open serial port...OK
[16/11/2011 16:23:01] Connecting to the RIFF Box...OK
[16/11/2011 16:23:01] Firmware Version: 1.28, JTAG Manager Version: 1.29
[16/11/2011 16:23:01] Selected Resurrector: [Samsung I9023]
[16/11/2011 16:23:01]
[16/11/2011 16:23:01] Connecting to the dead body...OK
[16/11/2011 16:23:01] Detected dead body ID: 0x1BA00477 - CORRECT!
[16/11/2011 16:23:01] Set I/O Voltage reads as 2.79V, TCK Frequency is RTCK
[16/11/2011 16:23:01] Adaptive Clocking RTCK Sampling is: [Sample at MAX]
[16/11/2011 16:23:01]
[16/11/2011 16:23:01] Resurrection sequence started.
[16/11/2011 16:23:01] Establish communication with the phone...OK
[16/11/2011 16:23:01] Initializing internal hardware configuration...OK
[16/11/2011 16:23:01] Uploading resurrector data into memory...FAILED
[16/11/2011 16:23:01] ERROR: RAM memory selftest failed.
[16/11/2011 16:23:01] [FINISH OPERATION_ID = DCC_ERASE_MEMORY]

---------------------


[15/11/2011 13:18:11] Open serial port...OK
[15/11/2011 13:18:11] Connecting to the RIFF Box...OK
[15/11/2011 13:18:11] Firmware Version: 1.27, JTAG Manager Version: 1.29
[15/11/2011 13:18:11] Selected Resurrector: [Samsung I9023]
[15/11/2011 13:18:11]
[15/11/2011 13:18:11] Connecting to the dead body...OK
[15/11/2011 13:18:11] Detected dead body ID: 0x1BA00477 - CORRECT!
[15/11/2011 13:18:11] Set I/O Voltage reads as 2.79V, TCK Frequency is 800 kHz
[15/11/2011 13:18:11]
[15/11/2011 13:18:11] Resurrection sequence started.
[15/11/2011 13:18:11] Establish communication with the phone...OK
[15/11/2011 13:18:11] Initializing internal hardware configuration...FAILED
[15/11/2011 13:18:11] ERROR: Read/Write memory failed during H/W Init.