Thread: T10 00114 help?
View Single Post
Old 06-23-2000, 21:12   #10 (permalink)
X-Shadow
No Life Poster
 
X-Shadow's Avatar
 
Join Date: Jan 2000
Location: GSM Forum
Posts: 1,108
Member: 871
Status: Offline
Thanks Meter: 602
Post

Hello Tombach:

Try this...

I also have some problems with 00W07 and
00W08... but here is MY way to solve it.
Give it a try...

Use saras 2.2 cracked version of course and
go to expert mode. Uncheck "Use INI"... and
check 'Ask IMEI'.
now press 'All' button. Follow the on screen
instructions and when the program does not
detect your phone after some steps of
power on, remove the battery quickly (even
if the program does not tell you to) and
put it back and press 'No' for a very short
moment. Program will again detect your phone.
Dont forget to put your original IMEI when
asked ok.

Now when all is done, phone will turn on
and will say 'Insert Correct Card'. Close
Saras proggie and run Ericsson Tools 2kay
(ER2000). Remove battery of phone and put
back again. Flash the phone again with
ER2000. Again, if the program does not
detect your phone, remove the battery, put
back quickly and press 'No' again. When
flashing is done, hopefully your phone will
be ok, but IMEI is changed

TIPS:
Use full charge battery
Remove SIM card
Press 'No' very very very quickly, if you
press too long your phone may be damaged!

Here is very strange thing that I noticed, I
used same flash file for Saras and ER2000,
I just changed the format from rxx to bin.
But in Saras, phone is not ok. But when same
flash file is used with ER2000, sometimes
it will work!!! Hmmmm my guess is maybe
some CRC checking problem and Checksum
miscalculations...

Good luck man!

Best Regards,
X-Shadow
  Reply With Quote
 
Page generated in 0.07855 seconds with 7 queries