View Single Post
Old 11-22-2011, 01:16   #1 (permalink)
zeddicus
Freak Poster
 
Join Date: Jan 2010
Location: Cuba
Posts: 219
Member: 1202427
Status: Offline
Sonork: 100.1604781
Thanks Meter: 27
Need help with a ZTE G-X990

Hello, I need some help here. The thing is I received this zte model with aparently improper flashing because it showed Invalid IMEI.
I repaired it successfully and it received no radio coverage.
So decided to flash it, in case it had being incorrectly flashed with another box. I have downloaded 2 versions from the x990 support folder, I flash them, the process ends correctly but then it reports it can not find the FFS.
This phone has a NAND flash chip. When I try to format the ffs it seems as if it were trying to format a NOR flash chip.
I am posting the current state of the logs of MModule after reading general information. I need some clue or idea from support or some more experienced user to figure out if the phone has a defective flash ship, or the current version of MModule is not working this model properly or if I am selecting something wrong at the time of flashing:

COM4 [VCP0] selected
module v4.09
Device: ZTE-X990
Checking data, wait...
Action: read/check information
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0004]: 00EC:0076005A003F [SAMSUNG] K9K1208X0C
chip size: 64Mb
page/spare size: 0200/0010
pages per block: 0020
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (115200)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: X990_V2_Z5_FR_D1EF111
detect NAND info...
number of areas/bytes to read: 1:00034000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: ZTEMT35_09A_GEMINI_BOOTLOADER_V005_MT6235B_X990_V2 _Z5_FR_D1EF111
nfi area detection (3 cores) finished: Ok
warning: ffs can not be detected
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: ZTEMT35_09A_GEMINI_PCB01_GPRS_MT6235B_S01.X990_V2_ Z5_FR_D1EF111.BIN
project-id: X990_V2_Z5_FR_D1EF111, 00000000
code offset: 00000000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
Disconnect...
done
Finished, time used: 49 sec
Remove/Install battery now !

There is a warning withing this log, almost at the end, that says it can not find the ffs area.

I am open to sugestions.

Br,

Zeddicus.
  Reply With Quote
 
Page generated in 0.06672 seconds with 7 queries