hi
Samsung P520 after arabic restart on Giorgo ****** logo
check flashing logs
Code:
Region: 1, 0x20000000-0x20000007, Length: 8 bytes
Region: 2, 0x20010000-0x2001494B, Length: 18764 bytes
Region: 3, 0x20020000-0x2002DDAB, Length: 56748 bytes
Region: 4, 0x20040000-0x200404A7, Length: 1192 bytes
Region: 5, 0x20042000-0x20194F3F, Length: 1388352 bytes
Region: 6, 0x20242000-0x21B6E63F, Length: 26396224 bytes
Region: 7, 0x21C20000-0x21FCC49B, Length: 3851420 bytes
Region: 8, 0x28000000-0x2915BFCB, Length: 18202572 bytes
1st: 00
1st:
1st Boot Ok, McuId: 000200A3, Rom: 000200A3, 6-1.1 (Trident HPE)
2nd Boot Ok, McuId: 000200A3, Rom: 000200A3, 4-1.1
Fll Boot Ok, Vers: 5.13, fl_sceptrehp_sgh_hw1_v24_s07_m01_1.sre
Flash1: Fl_Id: 00EC0000_22FD0000 - Samsung KBJ17KC00M-B
Flash2: Fl_Id: 00EC0000_00340000 - Samsung KBH1xPE00M-N 1G
Baud Rate Set: 460800 bps
MCU File: P520JPHA7.s3
Flashing NOR part...
Flashing NAND part...
Write Done, 49915352 byte(s), Time: 29:19
Mobile info
Code:
Software: P520JPHA7
Regions : Arabic
Language: ar,en,fr(fa,ur)
Release : 2008 January Rev: 7
Hardware: MP 1.500
IMEI: 356341-01-270429-0
User Lock : 00000000
MSL : Active
S/N : R9YQ693214
MSL : Deactivated
Lock Level: 00h [Not Locked]
SPCode[20]: ffh ffh ffh ffh ffh ffh ffh ffh 00h e1h 18h ffh ffh ffh ffh ffh ffh ffh ffh ffh
NB_CUR_LOCK:00h
NB_CUR_SPCODE:00h
PCK : 00000000 [#0141*00000000#]
NCK : 00000000 [#0111*00000000#]
SCK : 00000000 [#0121*00000000#]
SPCK: 00000000 [#0133*00000000#]
MCK : 00000000 [#0199*00000000#]
BT Address: 001fcd-bd460f
Repair MSL but no luck
Code:
Using MSL S/N: R9YQ693214
1st Boot Ok, McuId: 000200A3, Rom: 000200A3, 6-1.1 (Trident HPE)
2nd Boot Ok, McuId: 000200A3, Rom: 000200A3, 4-1.1
Fll Boot Ok, Vers: 5.13, fl_sceptrehp_sgh_hw1_v24_s07_m01_1.sre
Flash1: Fl_Id: 00EC0000_22FD0000 - Samsung KBJ17KC00M-B
Flash2: Fl_Id: 00EC0000_00340000 - Samsung KBH1xPE00M-N 1G
Baud Rate Set: 460800 bps
Read Done, St: 0x20000000, 65536 byte(s), Time: 00:01, 0
Flashing NOR part...
Write Done, 65552 byte(s), Time: 00:03
MSL Repair Done
please help me customer is going to kill me
