Originally Posted by wiro_cool Read General Info :
Scanning pin status,please waiting...
->..........
Pin-status Scan Done
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOT£º4
USB D-: 2 USB D+: 3 Mstar MSW853X
Press [ Save ] to save Pinout
Total expend 0 seconds
[G:5 D-:2 D+:3 Down:4] Apply to Box
If Scan other phone, please click [Stop]
Connecting, wait...
Connect Ok.
Initialize boot...
Boot OK!
Flash Type NOR
Flash ID 0020880D Flash Model NUMONYX_M58LR256KTk
Flash Size 0x2000000(32,0M) LOG Reading File :
Initialize in progress ...
Checking data ...
Serial No. MCN2009xxxxxxxxxx
Firmware V1.15
Checksum Exxx-Cxxx
Box Connected!
Ready working at COM3
Scanning pin status,please waiting...
Pin-status Scan Done
Operation done, Pin detect out.
BOOT : 4 USB D-: 2 USB D+: 3 Mstar MSW853X
Total expend 25 seconds
[G:5 D-:2 D+:3 Down:4] Apply to Box
If Scan other phone, please click [Stop]
Connecting, wait...
Connect Ok.
Initialize boot...
Boot OK!
Flash Type NOR
Flash ID 0020880D
Flash Model NUMONYX_M58LR256KTk
Flash Size 0x2000000(32,0M) Start Reading...
Read Done! LOG Format Auto Boot with Automatic Address :
Welcome to use McnBox!
Selected COM3
Current occupied port COM4
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2009xxxxxxxxxx
Firmware V1.15
Checksum Exxx-Cxxx
Box Connected!
Ready working at COM3
Scanning pin status,please waiting...
->..........
Pin-status Scan Done
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOT£º4
USB D-: 2 USB D+: 3 Mstar MSW853X
Press [ Save ] to save Pinout
Total expend 1 seconds
[G:5 D-:2 D+:3 Down:4] Apply to Box
If Scan other phone, please click [Stop]
Format addr Set Error.
Connecting, wait...
Connect Ok. Not support Reset. LOG Format Boot 1 with Automatic Address :
Welcome to use McnBox!
Selected COM3
Current occupied port COM4
Baud setting ...
Set Baud done
Initialize in progress ...
Checking data ...
Serial No. MCN2009xxxxxxxxxx
Firmware V1.15
Checksum Exxx-Cxxx
Box Connected!
Ready working at COM3
Scanning pin status,please waiting...
->..........
Pin-status Scan Done
Scanning,waiting...
->@@
Operation done, Pin detect out.
BOOT£º4
USB D-: 2 USB D+: 3 Mstar MSW853X
Press [ Save ] to save Pinout
Total expend 1 seconds
[G:5 D-:2 D+:3 Down:4] Apply to Box
If Scan other phone, please click [Stop]
Connecting, wait...
Connect Ok.
Initialize boot... Boot1 Error, Id: 1000 i try To change Boot 2,3 with Automatic Address but Problem Still Same,,Or for This Chipset Not Support to Format and just Support Writing File,,,???? Note : Phone Condition Normal just Can,t Read Micro SD |