GSM-Forum - View Single Post

.:KHALIFA:. · 12-19-2011, 07:05

first of all thanx to JC_BY for the useful post...

now here is the step by step procesure to flash B7722i..

1. Connect phone with Volume+ and Hold buttons - you see in Device Manager "USB device with DFU Capabilites"
2. Try to Update force driver to 52xdfu.inf, wich is placed in Flasher folder
3. Open flasher and follow instructions below

For downloading on Master

1 Select the “xxxx.usbid” using “SET USB ID” button.ex)공정UsbInstanceID.usbid-This step is only needed by product line2.

2 Select The “B7722_Sorrento_Setting_v01.mdl” using “SET MODEL” button.

3 Select The “Model_Name.ptt” using “Partition Table” button of Main.

4 Select the “Model_Name.ptt” of CSCex) B7722XX.ptt

For downloading on Slave

1.Choose one between With Slave andOnly Slave.With Slave : Downloading with MasterOnly Slave : Downloading only on Slave2.

2 Select The “Slave Setting File(.mdl)”ex) Slave_Setting_v01.mdl

3 Select The “Slave Application(.cla)”ex) SorrentoSlave.cla

press “START” button

NOTE: people facing problem with slave flashing needs to tick the WITH SLAVE .

thnx to shah.meer7879 for flashing procesure

BR
.:KHALIFA:.

12-19-2011, 07:05	#38 (permalink)
.:KHALIFA:. No Life Poster Join Date: May 2006 Location: U wont beleive Age: 43 Posts: 1,293 Member: 275631 Status: Offline Thanks Meter: 408	first of all thanx to JC_BY for the useful post... now here is the step by step procesure to flash B7722i.. 1. Connect phone with Volume+ and Hold buttons - you see in Device Manager "USB device with DFU Capabilites" 2. Try to Update force driver to 52xdfu.inf, wich is placed in Flasher folder 3. Open flasher and follow instructions below For downloading on Master 1 Select the “xxxx.usbid” using “SET USB ID” button.ex)공정UsbInstanceID.usbid-This step is only needed by product line2. 2 Select The “B7722_Sorrento_Setting_v01.mdl” using “SET MODEL” button. 3 Select The “Model_Name.ptt” using “Partition Table” button of Main. 4 Select the “Model_Name.ptt” of CSCex) B7722XX.ptt For downloading on Slave 1.Choose one between With Slave andOnly Slave.With Slave : Downloading with MasterOnly Slave : Downloading only on Slave2. 2 Select The “Slave Setting File(.mdl)”ex) Slave_Setting_v01.mdl 3 Select The “Slave Application(.cla)”ex) SorrentoSlave.cla press “START” button NOTE: people facing problem with slave flashing needs to tick the WITH SLAVE . thnx to shah.meer7879 for flashing procesure BR .:KHALIFA:.