View Single Post
Old 01-18-2012, 11:13   #4 (permalink)
mdalamgir
Freak Poster
 
mdalamgir's Avatar
 
Join Date: Feb 2008
Posts: 328
Member: 694638
Status: Offline
Thanks Meter: 162
E2530 Successful Unlock with Z3X Box

E2530 Successful Unlock with Z3X Box

Steps

1.Open "Samsung Tool"
2.Select model
3.Click "Read Info[Codes]"
4.Connect Phone via usb pressing * button[Phone must be off]
5.When you see this message "After power on phone - connect to UART cable" disconnect usb Then off the set & on again connect urt cable
6.Wait for codes..........& you will get code

Here is the log.........

Selected model: E2530
Selected com port: COM6
Selected speed port: 921600
Phone must be OFF
Press * and connect phone by USB cable
Connecting to Device... OK
Sending preloader ... OK
Sending loader ... OK
Damping ... OK
Erasing ... OK
Writing ... OK
After power on phone - connect to UART cable
Phone SN: RP5BB67573
Deactivate MSL - OK
Calculated code please wait...
Decrypted time: 47 sec
This is zone 0
[PCK]:Enter this without sim #0141*00000000# this is sim lock
[NCK]:Enter this without sim #0111*89487249# this is net lock
[SCK]:Enter this without sim #0121*00000000# this is CP lock
[SPCK]:Enter this without sim #0133*00000000# this is SP lock
[MCK]:Enter this without sim #0199*82777872# this is Master(freeze) code

Read info - ok
Elapsed time: 127 second, sw ver: 3.5.0030
  Reply With Quote
The Following User Says Thank You to mdalamgir For This Useful Post:
 
Page generated in 0.14360 seconds with 6 queries