| S3850 Samsung logo
Hi everyone!
I had Samsung S3850 hang on Samsung logo after Chinese firmware, did not start even with original firmware
I don't want to say the best boxes but the only SOLUTION. I have all JTAG Boxes: ORT, Riff, GPG JTAG & SMTi Did try every possible solution to fix this Samsung BADA phone, but after 2 days of suffering finally thanx to Medusa & Octopus Box, especially to product manager & supporter
However here is very simple SOLUTION:
1.Download & install the latest Medusa & Octopus software.
2.Solder & connect S3850 in Advance Mode
3.Full flash erase & disconnect
4.Connect in Easy Repair Mode
5.Repair BOOT with new downloaded Repair.mf file
6.Disconnect!
7.Now download S3850 firmware from support
8.Hold volume up(+) + Call then press Power to enter Download Mode
9.Flash with Octopus Box
After all when your phone is on & working, think how deep Medusa Box can go into the phone.
Octopus box log:
Erasing BOOT section. Please wait... Done
Erasing FIRMWARE section. Please wait... Done
Disconnected
Selected device model: Samsung GT-S3850
Connecting. Please wait...
MI: RTCK reaction time 126 ns, average speed 7936 KHz.
Medusa JTAG Firmware version 1.1.0.
Medusa JTAG Hardware S64 revision B.
Detected TAP ID: 07926F0F, IR Length = 4.
MI: Halting target, attempt 1.
JTAG speed : Auto (RTCK).
VREF level : 2.93 V
CPU : Broadcom BCM2133
Core ID : 07926F0F
MI: Loading Medusa Device Server V1.2.
MI: Starting...
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000135.
MI: Detailed server caps: FLASH, ECC, WDOG, DWP, IOCTL
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0xB0EC0040.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000135
Flash device: Samsung OneNAND KFH2G16Q2M
Flash ID : 00EC0040
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Write protection disabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\SAMSUNG_GTS3850_Re pair.mf" file...
Writting BOOT section. Please wait... Done
Writting UPCH section. Please wait... Done
Repairing IMEI... Done
Disconnected
Medusa box log:
Found phone on COM48
Firmware write started.
Writing BOOT\BCMBOOT section...
BOOT\BCMBOOT section has been written successfully
Writing BOOT\BOOT2 section...
BOOT\BOOT2 section has been written successfully
Writing BOOT\PATCH_DSP section...
BOOT\PATCH_DSP section has been written successfully
Writing BOOT\SYSPARM_DEP section...
BOOT\SYSPARM_DEP section has been written successfully
Writing BOOT\SYSPARM_IND section...
BOOT\SYSPARM_IND section has been written successfully
Phone will restart now. Please don't disconnect cable!.
Writing APPS section...
APPS section has been written successfully
Writing RSRC1 section...
RSRC1 section has been written successfully
Writing RSRC2 section...
RSRC2 section has been written successfully
Writing FactoryFS section...
Formating FactoryFS partition...
Formating successfully compleated
FactoryFS section has been written successfully
Writing CSC section...
CSC section has been written successfully
Writing SHPAPP section...
SHPAPP section has been written successfully
Phone will restart now
Firmware writing successfully completed |