View Single Post
Old 03-05-2012, 12:47   #5 (permalink)
firm
Junior Member
 
Join Date: Jan 2010
Posts: 6
Member: 1206296
Status: Offline
Thanks Meter: 0
MCU Nokia Version: 1.132, and up to date.
SMCU Nokia Version: 1.44, and up to date.
Flashing file:
BB5 [BB5 ALGORITHM] MCU File: rm237__07.30.mcusw 14 816 kB
Speed: [3250k, 6500k, 6500k, 98k] Baud.
Supported Hardwares: [0103192101001101, 010C192101001101]
Input power: 11.85V OK.
Output power at Line1 4.07V is in range of: 4.00V 10.0%
Input power: 10.86V OK.
Output power at Line1 4.07V is in range of: 4.00V 10.0%
--------------------------------------------------------------------------------
TBB5FlashPhoneThread 2.9.7.2928 finished at: 2012/03/05 18:08:15

Terminated with error: RX High after powerup (no phone/faulty cable), probably bad cable [7F000002].7E000117.00000102.0000020C.000110A6.0001115E.0001 1160.00011176.000115E0
MCU Boot Version: 1.069, and up to date.
SMCU Boot Version: 1.34, and up to date.
Device opened at USB->UniversalBox
 
 
Page generated in 0.12963 seconds with 6 queries